Keyless Entry Ranger w/no power locks

Hey, looks like there are a lot of knowledgable people here who really know their stuff. I have a 1999 Ford Ranger. It doesn't have power door locks. I want to add keyless entry. I'd like to be able to remotely lock/unlock the doors and have the panic button honk the horn/flash the lights.

I have purchased the DEI Valet 712t and a couple of actuators from Parts Express.

Valet 712T Keyless Entry System

My actuators (Part#330-010 from Parts Express) have two wires. One is green, the other is blue.

The unit has built in relays so I'm assuming I won't need additional relays. Although I do have some (330-073 12VDC Automotive Relay SPDT 30A).

Here's the info on the wires on it:

I'm not really clear on how to wire this. What wires go to each of the actuators? Which goes to the blue on the drivers door actuator, which to the green and also for the blue/green on the passenger actuator? Any help would be appreciated. 

Thanks,

MC 

87, N.O. goes to 12v fused at 10 amps each  87a,N.C. goes to ground comm.lock and comm. unlock go to actuator. one relay per actuator...

get the common lock and unlock wires on to the same color wires on the actuator, so they both move in the same direction

I am very much a newbie to this stuff. I am used to building computers and such but not much in this area. Let me ask you a few dumb questions...

Let me see if I have this straight...

I need to run wire #7 Violet/blk Lock #87 N.O. (input) to the 12V of my Ranger (yellow wire on Ignition switch harness Constant 12v+) with it fused with a 10amp fuse.

Wire #17 (Unlock 87a N.C.) goes to the ground point

#5 GREEN/ blk (Lock #30 Common output) to green wire on actuator

#8 blue/blk (Unlock #30 Common output) to blue wire on actuator

Is that correct?

I suppose if I want to do the progressive unlock (2nd press locks/unlocks passenger door) I would use wire #2 Blue to the blue wire on the passenger door actuator?

Thanks so much for your help. I truly respect the work that installers of alarms and auto accessories do. I see now that the money they charge is well earned. I'm trying to learn and appreciate any help I can get.

MC

Wire the voilet wires to 12 volt.

Brown and white to ground.

Green to lock wires and blue to unlock wires.

Thanks guys.

MC

One more dumb question, what gauge wire do I need to use?

Thanks,

MC

Thanks for the great advice!

MC