99 Dodge Ram keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 99 Dodge Ram keyless entry (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

think650

Member - Posts: 1

Joined: October 22, 2005

Posted: October 25, 2005 at 12:58 AM / IP Logged

So I bought a code alarm CSI-400 from circuit city. I installed the remote start completly fine and everything workes there but when it comes the keyless entry system I can't figure it out. I tried the 5 wire reverse polarity from this site and I keep blowing the fuse i have hooked up. I also did a search on these forums and didnt find anything. Anyone have any ideas. Should I just buy one of the 5 wire relay setups from the web? Any Ideas?

Thanks

Brent

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: October 25, 2005 at 1:21 AM / IP Logged

99 Dodge Ram keyless entry - Last Post -- posted image.

try switching 87a and 30 on each relay

Back to Top

Vestax

Member - Posts: 13

Joined: January 05, 2005

Location: United States

Posted: October 25, 2005 at 1:56 AM / IP Logged

KarTuneMan, you could be right but if he swapped out 87a and 30, won't he lose his power locks from inside the car since the alarm (-) pulse will only connect the switch with the motor at that point?

Tech soft says the car requires a positive pulse for lock, but a 5 wire for unlock. I figure all he needs is just a positive pulse with no 5 wire interrupt on the lock wire but leave the 5 wire relay on the unlock.

USUC World Champion - Stock System Class, Super Street Division. Special Edition Bose 26 piece speaker system with enhanced ported tweeters. 89.2 db Legal, 89.6 db Outlaw

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: October 25, 2005 at 7:31 AM / IP Logged

KarTuneMan wrote:

try switching 87a and 30 on each relay

Yep, Common mistake............

Meter wires from door switch to make sure you have them on correct PINs( 87a )

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 Dodge Ram keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.