'05/'06 Magnum/300/Charger

Has anyone bypassed the factory amp in any of these models, or does the can bus control the input, and I'll have to run my own speaker wire to the doors & deck? According to the pin-out at the amp, the output wiring to the speakers out weighs the input wires from the H/U, don't really see how to match them up for the bypass. Any help would be appriciated 

Thanks, that what I thought after doing some research today. I can't seem to find anyone who stocks this, any idea who I should contact?

you could go to your local Circuit City and they could special order it for you.

Thanks, that's what I'll do,. Last question, with the metra kit, will I be able to use the existing factory wiring to the speakers, or will I have to run my own speaker wires? I appreciate your help.

the amp is under the drivers dash you can get all speaker wires there to left of your collumtj

YES, the metra harness has a plug for the dash for your radio, has power and ground wires but you need to get an accessory wire in the fuse box, and the plug at the amp has long speaker wires on it so if you wanted to add your own aftermarket amp the wires will reach pretty much anywhere.