Python 1500 ESP

Home / the12volt's Install Bay / Car Security and Convenience / Python 1500 ESP (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 14, 2005 at 11:25 PM / IP Logged

I just picked up a Python 1500 ESP alarm. Honestly i don't know much about installing alarms but I am confident with electrical work. I took the alarm out of a 89 mustang so I have a reasonable understanding of how it goes back in my car. I would appreciate installation directions and a wiring diagram for a 90 mustang gt convertible. Thanks for the help, This forum rox, great information available! If you have any other ideas of things I will need for the install or things to be aware of let me know.

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 15, 2005 at 12:04 AM / IP Logged

not much to know but the door locks are 5 wire and will require relays

12volts	yellow	+	ignition harness
Starter	RED / blu or wht/pink	+	ignition harness
Second Starter
Ignition	RED / green	+	ignition harness
Second Ignition
Third Ignition
Accessory	gray / YELLOW	+	ignition harness
Second Accessory
Keysense
Power Lock	pink / YELLOW	5wi	either kick panel
Power Unlock	pink/green	5wi	either kick panel
Lock Motor
Unlock Motor
Parking Lights+	brown		light sw or dr. kick
Parking Lights-
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door Trigger	BLACK/ blue	+	at pin switch in kick
Dome Supervision
Trunk/Hatch Pin
Hood Pin
Trunk/Hatch Release	purple / YELLOW	+	at switch
Power Sliding Door
Factory Alarm Arm
Factory Alarm Disarm
Disarm No Unlock
Tachometer	dk. GREEN/ YELLOW	AC	coil or diagn. plug
Wait to start
Brake Wire	RED / lt. green	+	brake pedal switch
Parking Brake
Horn Trigger	yellow/lt. green	-	steering column
Memory Seat 1
Memory Seat 2
Memory Seat 3

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 15, 2005 at 12:06 AM / IP Logged

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 15, 2005 at 12:06 AM / IP Logged

I'm apparently new here. I found the wiring diagram for my car. Are there any equivalents for my python 1500 esp esp? such as a Viper 750 esp or something?

You know, if anyone lives in Saramento and wants to come help me install this thing I'd pay.

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 15, 2005 at 12:13 AM / IP Logged

what are you talking about

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: November 15, 2005 at 12:17 AM / IP Logged

https://www.the12volt.com/installbay/findinstaller.asp?search=yes&City=sacramento&state=California&country=United+States

Steve G

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 15, 2005 at 12:18 AM / IP Logged

Here is what i got with the alarm:

python 1500 esp box
10 relays, some labeled (radio,gas, lock,unlock) 6 others unlabeled
shock sensor
xhf antenna
horn
alarm status light

I need some remotes and a battery back up. but I think i have enough relays to do a bunch of extra stuff.

so does it matter what controllers I use? I assume 4 button controllers

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 15, 2005 at 1:07 AM / IP Logged

all i need is a wiring diagram or install instructions for that python 1500 esp if anyone knows where i can get a pdf or manual.

iskidoo

Silver - Posts: 1,040

Joined: December 08, 2002

Location: Maine, United States

Posted: November 15, 2005 at 8:54 AM / IP Logged

http://directechs.com/guides/manuals/ig/python/N553P.pdf

Steve G

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 16, 2005 at 1:18 AM / IP Logged

Thanks for all the help. I think I have everything pretty much figured out. i am reading thru the directions over and over.

I don't have any remotes for this system, will that cause me any problems when I'm installing it? I know i won't be able to test anything until I get the remotes but can I just unhook the inline fuse to the main unit and not have any problems with say my alarm arming itself or the ignition kill taking affect.

Also is this unit a good one or is it older or what. I've never delt with alarms before I'm new to them.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.