the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 Cavalier Class 2 bypass woes


Post ReplyPost New Topic
< Prev Topic Next Topic >
jacksonsmobile 
Member - Posts: 3
Member spacespace
Joined: November 15, 2005
Location: Canada
Posted: November 15, 2005 at 8:50 PM / IP Logged  
Hey guys, I just did your typical class 2 bypass on an O4 Cavi and now the module is going nuts. Won't stop bonging all the time and the odometer doesn't light up (works, just no illumination). Bad module? Any other ideas? I have never had this happen before. I forget what module I used, but it's the one in the yellow package that every one carries. God my memory is getting bad. Thanks.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 15, 2005 at 8:58 PM / IP Logged  
Remove the aftermarket system and reinstall the OEM one. Check for any problems and post your results with the model & brand interface module you used.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: November 18, 2005 at 5:23 PM / IP Logged  
Your module is most likely the cause of the odometer problem. The backlighting for it is handled by the factory radio.
sparky
NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: November 18, 2005 at 6:48 PM / IP Logged  
Sounds like you may be using the GMRC-01 or -02. They have that problem if your using version 3.5 you need 3.6.
Mike

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer