the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Door lock question


Post ReplyPost New Topic
< Prev Topic Next Topic >
tintman97 
Copper - Posts: 113
Copper spacespace
Joined: October 20, 2005
Posted: November 18, 2005 at 10:04 PM / IP Logged  

Ok 1991 chevy ck1500   door locks.  5 wire No prob.  On  omega's  "THE DISC" it says lt. blue and black and red or white.   Found below and behind drivers dash speaker.   K no prob found the wires understand the 5 wire deal verified that they are the correct wire with a multimeter.  I wired my relays  as the  diagram in the door lock area says to.   hooked it up to my mars-22 RS and nothin happens.  I checked my output on the unit it works.  Is this the correct area to cut into  is my question.  All wiring connections have been checked over and over.    any advice  would be great

Snapper

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 18, 2005 at 10:13 PM / IP Logged  
There are 2 Black wires in that harness...........Verify
5 wire will reverse the Grounds........If you have only one wire hook up it won't work........Did you use a DLS or your own Relay wiring??
Also you can get the same wires at the Door Boot
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
tintman97 
Copper - Posts: 113
Copper spacespace
Joined: October 20, 2005
Posted: November 18, 2005 at 11:17 PM / IP Logged  

All wires are verified in the truck.

my own relay wiring i followed the diagram  from this site  every other diagram has been correct

I figured i could get them there also so does it matter where u cut into the line for the lock  IE at the speaker or at the boot in the door 

I checked all my relay wiring all the numbers match

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 19, 2005 at 8:37 AM / IP Logged  

One of the Unlock BLACK wires also had a Red Stripe

If you supply a GROUND to PIN 85 / Lock or PIN 86 / Unlock does it work??

Door lock question -- posted image.

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer