viper 160 xv remote start manual

i have a viper 160 xv remote starter . i have miss place the wiring manual  would like to know if some one my have one to share .

Primary Harness

Orange - (-) 500mA Armed OutputWhite - Selectable Light Flash OutputWHITE/ Blue - (-) Remote Start Activation InputBLACK/ White - (-)200mA Domelight Supervision Outputunused - Blue -(-) second unlock outputunusedBlack  - Ground inputunusedBrown - (-)Horn Honk outputRed - Constant 12 volt inputRED / White - (-)200mA Channel 2 Validity OutputHeavy Gauge Relay WiringPurple - Starter output to Starter SideGreen - Starter input from Key sideRed - High current 12v inputPink - Output to ignition circuitRED / white - High current 12v inputPink/white - Output to second ignition/accessory circuitAuxiliary Harness (H2)Violet/black - (-) Channel 4 outputGREEN / WHITE - (-) Factory Rearm outputGray/black - (-) wait to start inputLight GREEN/ black - (-) Factory DisarmRemote Start Harness (h3)Blue/white - (-)200mA 2nd status/ rear defogger - latched/pulsedGray - (-) Hoodpin shutdownBrown - (+) Brake Shutdown wireViolet/black - tach inputBLACK/ white - (-) neutral safety switch inputDoor Lock HarnessGreen - (-) Lock, (+) Unlockno functionBlue - (+)lock, (-) UnlockRemote Start Aux. Harness Blue - (-)200mA Status OutputOrange - (-)200mA Accessory Relay triggerPink - (-)200mA Ignition relay triggerPurple - (-)200mA Starter relay trigger

mikelav wrote: i have a viper 160 xv remote starter . i have miss place the wiring manual  would like to know if some one my have one to share .

which one do i connect the bypass too

mac

hook up your bypass wire to the blue/white....2nd status dxdmi

Can anyone tell me how to change the run time from 12 to 24 minutes?? I guess the default is 12 but need 24 and it is the one thing I can't find in the manual...

its in the menu function, I cant remember for sure but Im thinking its in the second menu and you hit the 2nd channel (Unlock button) to change it once you find the correct setting number.

Key on off..push program button 3 times and push and hold.... Feature 3 default setting or 1 is 12min, #2 setting is 24min, #3 is 60min

xdmanx007 wrote: Key on off..push program button 3 times and push and hold.... Feature 3 default setting or 1 is 12min, #2 setting is 24min, #3 is 60min

Closee but you have to hold the programming button until the led flashes twice, before pushing it three times.

Cause I'm So white and nerdy...

First Class Certi-fried installer

Thanks guys but apparently the Viper starters can't work in my vehicle... I will start a different thread about that in hopes of finding out why...

what is the vehicle and what seems to be the problem?  I deal with these 160's all the time.