2003 GMC 2500 PU -heavy duty -need diagram
Welcome Guest :)
mobileinstallat
Copper -
Posts: 92
Joined: October 14, 2002
Location: United States
Posted: December 14, 2002 at 1:13 PM / IP Logged
I have the 2002 but would love to see a 2003.
Velocity Motors
Moderator -
Posts: 12,488
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: December 14, 2002 at 4:49 PM / IP Logged
This is for the 2003 GMC PU
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|red (x2) |+ |ignition harness || STARTER|yellow |+ |ignition harness || IGNITION|pink (12 awg) |+ |ignition harness || SECOND IGNITION|white |+ |ignition harness || THIRD IGNITION|pink (18 awg) |+ |ignition harness || ACCESSORY|orange |+ |ignition harness || SECOND ACCESSORY|brown |+ |ignition harness || POWER LOCK|see directfax | | || POWER UNLOCK|document #1601 *2 | | || LOCK MOTOR|gray | |driver door module in door || UNLOCK MOTOR|tan | |driver door module in door || DISARM DEFEAT|tan | |pass. door module in door || PARKING LIGHTS +| | | || PARKING LIGHTS -|gray/black | |brown plug @ BCM *1 || HEADLIGHTS| | | || DOOR TRIGGER|gry/blk(L),blk/wht(R|- |each door module in door *3 || DOME SUPERVISION|use door trigger | | || TRUNK/HATCH PIN| | | || HOOD PIN| | | ||TRNK/HTCH RELEASE| | | || FCTRY ALARM ARM|arms with lock | | ||FCTRY ALRM DISARM|lt. green |- |driver door module in door || TACHOMETER|NOT pnk, blk, or brn| |any ignition coil || SPEED SENSE| | | || BRAKE WIRE|white |+ |brake pedal switch || HORN TRIGGER|black |- |steering column || WIPERS|pink |- |steering column || LF WINDOW UP/DN|blue - brown |A |driver window motor || RF WINDOW UP/DN|blue - brown |A |passenger window motor |Notes:
NOTE: This vehicle has the passlock II immobilizer system that, when adding a remote start, must be interfaced with. Use DEI part 555t or 555L. The passlock II wire colors are yellow, black, and RED / white (not used). *1 The BCM (Body Control Module) is under the driver side dash. *2 On base model trucks the lock wire is lt. blue (-) and unlock wire is white (-). They are in the lt. blue plug at the BCM. *3 On base model trucks the door trigger wires are in the lt. blue plug at the BCM. On 4dr trucks the LR door trigger is lt. blue/black, and the RR is lt. GREEN/ black. They are in the purple plug at the BCM. Use all wires and diode isolate.Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Follow the12volt.com
Wednesday, May 15, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.