Gentex 313

Please don't close/lock this. I've already blown up one mirror and am on my second. I'd really like to get this installed. Source: 2005 Titan. GNTX-313. 10 pin harness, with a dongle which I am assuming is the compass. I tried to get power to my first mirror and got a snap, crackle, and pop w/ smoke. 01 blue/red 02 violoet/red 03 empty 04 empty 05 empty 06 GREEN/ red 07 GREEN / WHITE 08 black 09 empty 10 yellow/red Please help! Trying to t-tap into ground/power on a Toyota SUV.

Ok, here's the 411. Please don't flame for my imprecision, but I'm a newbie. Just trying to be helpful by answering my own question instead of being an "ask & run". Ok. The first mirror I had w/ a GNTX-313 w/ temp/compass. The second one was a GNTX w/out. Both harnesses were the same. 01 blue - ? 02 violet - ? 03 empty 04 empty 05 empty 06 GREEN/ red - power 07 GREEN / WHITE - ? 08 black - ground 09 empty 10 yellow/red - power Not sure which of the green or yellow were always on or switched. I just know when only one was hooked up, the mirror & auto-dim worked, but the HomeLink did not. When the 2nd power wire (I'm assuming always on) was connected, the HomeLink worked. Unfortunately I can't remember which was which. I'm going to guess that the 3 remaining wires represent mirror dim on/off, and reverse dim cutoff. So, that's the scoop on the GNTX-313 10 pin, at least power/ground. Hope this helps someone.