the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

what matt weight


Post ReplyPost New Topic
< Prev Topic Next Topic >
jw007 
Member - Posts: 7
Member spacespace
Joined: November 25, 2005
Location: United States
Posted: November 28, 2005 at 9:58 AM / IP Logged  

I am about to order fiberglass chop matt from US composites as well as the resin.

Which weight of chop matt should I go with. I made 1 other box, but I bought the matt from a local boat shop and they didn't ask me what weight I wanted.

jw007 
Member - Posts: 7
Member spacespace
Joined: November 25, 2005
Location: United States
Posted: November 28, 2005 at 12:11 PM / IP Logged  

After re-searching using just the term "oz" I found a thread that answered my question.

https://www.the12volt.com/installbay/forum_posts.asp?tid=53730&KW=oz

I figured I'd post it here so no one repeats themselves.

Jason


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, January 22, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer