test acc or ign 2 wire

Home / the12volt's Install Bay / Car Security and Convenience / test acc or ign 2 wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

minhbach

Copper - Posts: 93

Joined: December 10, 2004

Location: United States

Posted: November 29, 2005 at 1:02 AM / IP Logged

Could anybody show me how to test accessory and ignition 2 wire with the voltmeter. Please show me the correct way to test it. Some people said it won't read 12 at crank and run position if it is the acc. wire. It only read at the on position how about acc. position

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: November 29, 2005 at 2:33 AM / IP Logged

Think of it like this..acc. is the accessories in the car.. So when you put the key in and power on the radio or a/c etc..there should be 12v on the suspected wire. Ignition and ignition 2 will keep 12 before and during crank.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

test acc or ign 2 wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.