the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

system for 04 mustang


Post ReplyPost New Topic
< Prev Topic Next Topic >
bagedmazda 
Member - Posts: 14
Member spacespace
Joined: November 14, 2005
Location: United States
Posted: December 02, 2005 at 1:16 PM / IP Logged  
Im wanting to change up the whole system in my mustang. Right now i have the factory mach100 headunit and mids and highs and two kicker comp 10" and a jl audio e1200. Im running a sealed box i build because of limited room in the trunk. but it dosent sound to great and i want more, thinkin maybe the box.
arrow12 
Silver - Posts: 527
Silver spacespace
Joined: October 06, 2005
Location: United States
Posted: December 02, 2005 at 1:18 PM / IP Logged  
You might want to look into an aftermarket headunit.  You got to start from the ground up, and the HU is the ground.
That's my opinion. Take it, leave it, or correct me.
bagedmazda 
Member - Posts: 14
Member spacespace
Joined: November 14, 2005
Location: United States
Posted: December 02, 2005 at 5:09 PM / IP Logged  
i thought about it but i like its a 6 disc indash. and im gonna try keep it atleast till it breaks or get some extra dough for a indash. What you think about the subs and amp its not alot of power but the subs are 150rms and i think the amp is 220watt mono block if i rember right. Im also intrested in maybe finding a better box, but i looked around and nobody makes one for it.
JMaxx93 
Copper - Posts: 73
Copper spacespace
Joined: December 02, 2003
Location: United States
Posted: December 02, 2005 at 5:13 PM / IP Logged  
i vented enclosure  will be louder but "peaked" and blah blah blah. you may have to have one built buy an installer.  you could use a larger amp also.
arrow12 
Silver - Posts: 527
Silver spacespace
Joined: October 06, 2005
Location: United States
Posted: December 02, 2005 at 9:49 PM / IP Logged  

You should probably look into a better amp.  220W RMS isn't too much for 2 150 RMS subs (300 total).  Try to get a little closer to 300W if you can.  Secondly how are you getting the amp a signal?  High low converter or just speaker (high) level inputs?

That's my opinion. Take it, leave it, or correct me.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer