avic n1 or 2 problem

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / avic n1 or 2 problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

zadam123

Member - Posts: 27

Joined: May 23, 2004

Location: United States

Posted: December 06, 2005 at 9:39 PM / IP Logged

I have an avic n1 which was converted to a n2. after a few months of the conversion my tv dont flip down into the slot when i detach the face or shut off the car, but it will if i hit the close button for it.

Is there a button i may have hit by accident to stop this from happening or is there a problem with the radio itself

thanks

adam

Back to Top

Hornshockey

Silver - Posts: 520

Joined: January 31, 2005

Location: Texas, United States

Posted: December 06, 2005 at 10:03 PM / IP Logged

There is an option in the initial settings menu for Auto/Manual flap operation. Somehow it seems you switched it to manual.

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

Back to Top

zadam123

Member - Posts: 27

Joined: May 23, 2004

Location: United States

Posted: December 07, 2005 at 4:58 AM / IP Logged

does anyone know how to change it back ot auto?

this just happend one day, there was no installation when it happend.

adam

Back to Top

whtcrxghst

Copper - Posts: 210

Joined: August 05, 2005

Posted: December 07, 2005 at 11:36 AM / IP Logged

As stated above "There is an option in the initial settings menu for Auto/Manual flap operation." So hold down the source button until the unit is off, touch the screen, and hit initial and look for the icon.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avic n1 or 2 problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.