01 honda accord door trigger

hi, i was installing a 2 way remote start/alarm system for this car. but i have a problem with the door triger. IT's BLACK/ WHItE (-) located at a 4 pin green connector in passenger side fuses. i have use the right wire, but when i connect the door triger wire(-) negative from the alarm unit to the BLACK/ white, it's not working. the alarm tell me it's not the right wire. when i open the door it's support to be flash the parking lights, but it's not. please help thanksJohnnynguyen

bobk wrote: Test the wire with a dvm, will read 12v with door closed and 0v with door open. The parking light flash when you open the door??? If the alarm is armed and you open a door the alarm will sound and the plights should flash but not just opening a door.

i mean when i open the door the parking light is not flashing. it's support to flash. and in arms position open the door try to test if the alarm is sound. but it didn't

Johnnynguyen

bobk wrote: Door Trigger BLACK/ white   -   passenger side fuse box , Just found this.

yes, i connect to this BLACK/ white wire at passenger side fuse box. 4 pin green connector. i have install a 2 way remote start/alarm into my honda civic and it's work perfect. everytime i open the door the parking light flashing. and in arm position, open door with the key the alarm will sound. i think every 2 way remote start/alarm system will flashing like that.

Johnnynguyen

bobk wrote: I think I understand about the plight blinking when you open the door, i'll bet that is when you remote start then open the door. If that is what you are talking about then you need to meter the wire you think you need and it will meter 12v+ with door closed and 0.0v with door open. If that does not happen you have the wrong wire period.

i'm sure that i get the right door trigger wire from my Civic. the parking light will blinking any time i open the door. even i'm not remote start the car. maybe its flashing for safety. like park the car at night on the high way. etc....

Johnnynguyen