service light on, 99 Suburban, viper 560

Home / the12volt's Install Bay / Car Security and Convenience / service light on, 99 Suburban, viper 560 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

gpgt97

Member - Posts: 5

Joined: December 10, 2005

Location: United States

Posted: December 10, 2005 at 9:44 PM / IP Logged

I installed the 560XV plus the 555L on a 99 Suburban everything went fine except for the service engine soon light is on. Everything on alarm/rs works fine, both ignition wires are connected plus the accesory wire. I pulled the code with an auto tap and it read "factory ignition module or misfire". Not too much trust in the codes, cheaper auto tap. After clearing the code and restarting, the light came back on. All input would be greatly appreciated.

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: December 10, 2005 at 10:31 PM / IP Logged

you get the white ign wire?

gpgt97

Member - Posts: 5

Joined: December 10, 2005

Location: United States

Posted: December 11, 2005 at 5:36 AM / IP Logged

yes i did.....................i noticed that on the diagram you find here, that it mentions a brown wire, which is suppose to be a third ignition. but the other three diagrams i reference do mention this brown wire.

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: December 11, 2005 at 8:04 AM / IP Logged

are there any drivabilty problems? or change in engine proformence, idle,or stalling?

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

pimpedprobegt

Member - Posts: 22

Joined: November 14, 2005

Posted: December 11, 2005 at 9:25 AM / IP Logged

The brown wire is an accessory wire which controls the wipers and radio. Does the SES light come on only when remote started or when it is started with the key also?

pimpedprobegt

Member - Posts: 22

Joined: November 14, 2005

Posted: December 11, 2005 at 9:28 AM / IP Logged

one more question is it an old 99 body style or new 99 body style?

gpgt97

Member - Posts: 5

Joined: December 10, 2005

Location: United States

Posted: December 11, 2005 at 9:40 AM / IP Logged

no driveability problems..............no stalls, no tranny problems. just the light. i am pretty sure it only comes on with the remote, but once the light comes on it stays on til i clear it. as for the old or new body style, i am not sure what you mean. It has the double doors in the back.

fingaz22

Silver - Posts: 410

Joined: March 11, 2005

Location: United States

Posted: December 11, 2005 at 12:51 PM / IP Logged

so if you start your truck with the key no ses? but does come on when you remote start.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

gpgt97

Member - Posts: 5

Joined: December 10, 2005

Location: United States

Posted: December 11, 2005 at 7:29 PM / IP Logged

the light comes on either way.. Any other suggestion?

pimpedprobegt

Member - Posts: 22

Joined: November 14, 2005

Posted: December 11, 2005 at 7:36 PM / IP Logged

The new body style is similar to the 00-02 suburbans, the old is 89-98 body style. 99 is split into both.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.