the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Anyone do Double DIN in Dodge Ram yet?


Post ReplyPost New Topic
< Prev Topic Next Topic >
giff 
Member - Posts: 38
Member spacespace
Joined: November 23, 2002
Location: Afghanistan
Posted: December 17, 2005 at 11:03 PM / IP Logged  
I'll be buying a new truck next year and would really like to put in a AVIC-D1. BUt I cant tell from the Dodge website if the 2006 model year would accept double DIN. (THe one picture of the dash on their site looked like it might). I wonder if any of the Pro's here have done double DIN retrofits?
oddball 
Copper - Posts: 53
Copper spacespace
Joined: June 29, 2005
Location: Korea, North
Posted: December 23, 2005 at 5:21 AM / IP Logged  

Hello Giff,

I did. By using Genuine MOPAR installation panel, Double DIN installation was easy. I am very sorry that I don't know how to cut&paste installation picture on this forum. I use CAN-BUS interface and 2DIN face panel.

Good Luck!

giff 
Member - Posts: 38
Member spacespace
Joined: November 23, 2002
Location: Afghanistan
Posted: December 26, 2005 at 2:34 PM / IP Logged  
oddball wrote:

Hello Giff,

I did. By using Genuine MOPAR installation panel, Double DIN installation was easy. I am very sorry that I don't know how to cut&paste installation picture on this forum. I use CAN-BUS interface and 2DIN face panel.

Good Luck!

Thank you, I didnt know and would not have even considering asking if MOPAR sold a 2DIN face plate- that should make things easier.
neutrino 
Member - Posts: 1
Member spacespace
Joined: January 12, 2006
Location: Canada
Posted: January 12, 2006 at 10:36 AM / IP Logged  
oddball wrote:

Hello Giff,

I did. By using Genuine MOPAR installation panel, Double DIN installation was easy. I am very sorry that I don't know how to cut&paste installation picture on this forum. I use CAN-BUS interface and 2DIN face panel.

Good Luck!

Any chance you would have a Part#? My local 5* cant seem to find it.

Thanks

oddball 
Copper - Posts: 53
Copper spacespace
Joined: June 29, 2005
Location: Korea, North
Posted: January 14, 2006 at 7:17 PM / IP Logged  

Hello NEUTRINO,

Just back from UNITED STATES, lot of installations waiting for me. Let me know your vehicle's interior color. I will give you mopor parts number for you. As Double DIN installation face panel&brackets, we use Japanese Mfg. I don't know there are available in USA or Canada. Thank you!

notoriouswill 
Member - Posts: 32
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: February 04, 2006 at 2:17 AM / IP Logged  
I put them in all the time in Ram's. Here is a pic of the install. Just a little fiberglass and some paint and it is all done. Takes about a day to complete.
Anyone do Double DIN in Dodge Ram yet? -- posted image.
1 Memphis Mojo 15
1 Memphis 4000 watt amp
1 Memphis 75watt 4 channel amp
2 Memphis 6.5" MSQ's
Anyone do Double DIN in Dodge Ram yet? -- posted image.
ohlarikd 
Copper - Posts: 56
Copper spacespace
Joined: January 04, 2006
Location: United States
Posted: February 06, 2006 at 3:51 PM / IP Logged  
Is that a 2005 and below RAM? Is that the stock panel that was cut larger with the ends fiberglassed in?
I am asking because I thought the Mopar part that was being talked about was for a 2006+ RAM.
I had this done to my 2005, but I think your panel is cleaner and straighter than mine - good job.
Derek
giff 
Member - Posts: 38
Member spacespace
Joined: November 23, 2002
Location: Afghanistan
Posted: March 03, 2006 at 11:48 PM / IP Logged  
notoriouswill wrote:
I put them in all the time in Ram's. Here is a pic of the install. Just a little fiberglass and some paint and it is all done. Takes about a day to complete.
Anyone do Double DIN in Dodge Ram yet? -- posted image.
Would you be interested in making and selling more of those install kits???
giff 
Member - Posts: 38
Member spacespace
Joined: November 23, 2002
Location: Afghanistan
Posted: March 06, 2006 at 10:40 PM / IP Logged  
ATTENTION! I thin k I found the Aanswer to my DOUBLE DIN woes!!!
OK Heres the MOPAR PART NUMBERS for DOUBLE DIN Dash Bezels:
5JZ121DHAC - "D5" color w/ REC
5JZ121J8AC - "J3" color w/ REC
5JZ131Z2AC - this one says REC radio, but is woodgrain (JBB code)
1BN391Z2AB - REC radio, but SRT-10 design
Now to find out what else I need; www.dodgeparts.com sells a "Laramie" 2DIN dash bezel assembly for $45.00 US. I see people on Ebay paying 65+ for used ones (WHY does Ebay continue to appeal to people?????)
ohlarikd 
Copper - Posts: 56
Copper spacespace
Joined: January 04, 2006
Location: United States
Posted: March 07, 2006 at 10:15 PM / IP Logged  
Can you post a link to any of these parts? Any pics? I find it odd that Dodge would sell a double-din bezel. What purpose would that serve Dodge?
Derek
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, October 1, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer