Land Rover Discovery.

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Land Rover Discovery. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

oldboy

Member - Posts: 24

Joined: March 22, 2002

Location: Australia

Posted: December 20, 2005 at 6:05 AM / IP Logged

Can someone please help. I have had heaps of trouble with the original alarm system in my 1995 Discovery so opted to install an aftermarket alarm. It all works fine but how do i disconnect the factory alarm as the factory immobiliser passively arms and i therefore need to carry two remotes with me. One to disarm the aftermarket alarm and one to disarm the factory system.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 20, 2005 at 9:13 AM / IP Logged

Look for a blue/green NEG(-) in the drivers kick, this is factory dis-arm. Thats the only info I could find!

The astrochart shows this also being diode isolated, cathode (white line) towards your new security system, good luck.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Land Rover Discovery.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.