CHDL2 01 Intrepid

Home / the12volt's Install Bay / Car Security and Convenience / CHDL2 01 Intrepid (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

northern

Copper - Posts: 154

Joined: November 04, 2005

Location: United States

Posted: December 23, 2005 at 4:56 PM / IP Logged

Going to do an install this weekend on an 01 dodge intrepid. I just opened up a CHDL2 door lock kit.

The kit explains to hook the pink/white wire up to the arm/disarm wire of the vehicle.....

Should I hook it up to the arm, or the disarm wire?

Also this is a - output and the door locks on that vehicle are positive.

Any help appreciated. Thanks.

jdeezay

Member - Posts: 28

Joined: August 15, 2005

Location: United States

Posted: December 23, 2005 at 7:11 PM / IP Logged

the arm and disarm wire are the same lt green w/ orange does it have a grey sentry key. or the red light on the top of the dash. if not the white w/ dk green will be your next try same harness

northern

Copper - Posts: 154

Joined: November 04, 2005

Location: United States

Posted: December 29, 2005 at 2:55 PM / IP Logged

Problem on the intrepid, these arm and disarm wires are positive. As far as I know the wire off the CHDL unit is a negative...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

CHDL2 01 Intrepid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.