1999 dodge ram 1500, 5 speed start problem

  here's the deal,   i just installed an ultrastart 2256 in this truck (not soon enough the stereo was stolen 4 days ago) and every thing went great!  i tested it a couple of times, worked sweet. then when i was putting the dash back together  i saw a little spark from the wires for the radio, which inturn blew a fuse for the domelights. i wasnt worriedabout the fuse until i tried to remote start again. diagnostic code said door was open.  o.k.   i replaced the fuse (took a while to find it) iactually disconected the battery first hoping that it would reset itself but ended up having to hunt for the fuse for domelights. all of that done now i cant get the truck to run. it will turn over, but wont fire. some how there is no spark.   all of the fuses seem to be o.k.     any ideas?jmacf14

check all maxi  fuses under hood & make sure the ing wires at the colum throw pwr in crank mode over 20 years of experience in the 12 volt industry

  I checked all of the fuses, even the one under the hood. I have power as it should be at the ignition during start, it just wont run.  im wondering if a crank angle sensor or ignition module got shorted out somehow? im baffled.jmacf14

Factory immobilizer?? Try to re-program the tach maybe???