Prostart 34-0613-2 Mazda Protege

Home / the12volt's Install Bay / Car Security and Convenience / Prostart 34-0613-2 Mazda Protege (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: January 03, 2006 at 5:49 PM / IP Logged

It sounds like you're waiting for the lights to come on while the hood pin is down. You must release it for the lights to come on, then while the lights are on, you push and release it again. Now the lights will stay on and let you enter programming.

Keith

Back to Top

shugalou

Member - Posts: 6

Joined: January 02, 2006

Location: Canada

Posted: January 04, 2006 at 8:28 AM / IP Logged

Well after almost throwing the unit against the wall I have it all figured out!

I went to CT and took back the Unit and plugged in the new one and bingo started making sounds and the hood pin flashed. Programming the remote was a bit of a challenge as well as setting the time on the remote, but the unit now works and I can finally relax...after 2 days.

Thanks to everyone that helped me out.

Cheers guys

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Prostart 34-0613-2 Mazda Protege

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.