Where to place ports

Home / the12volt's Install Bay / Car Audio / Where to place ports (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pimpedprobegt

Member - Posts: 22

Joined: November 14, 2005

Posted: January 02, 2006 at 11:12 PM / IP Logged

I am building a ported sub box for a MTX 5512.44 sub. My design program says that a 1.25 cubic ft box, with a 3.5" inside diameter port that is 20.5" long, the box will be tuned at 29.6 hz. What i need to know is where do i place the port. The only option is on the top of the box due to the design of the box to fit it in the vehicle. Does it matter which side of the top I put it in or more towards the front or back?

1997 Chevy K1500

Clarion VRX935VD

Power Accoustix 2.5 Farad Cap

MTX 81001

MTX Thunder 302 x2

Alpine SWE 12 x4

Blaupunkt highs

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: January 03, 2006 at 10:14 AM / IP Logged

Ideally the port should be on the same baffle as the driver.

Support the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Where to place ports

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.