2002 Isuzu Rodeo Factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / 2002 Isuzu Rodeo Factory alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tewalk18

Member - Posts: 11

Joined: December 06, 2005

Posted: January 04, 2006 at 3:25 PM / IP Logged

Hello, I am installing a remote start in a 2002 Isuzu Rodeo and the wire diagram told me that the factory arm wire was purple and the factory disarm was yellow/blue both in a white plug in drivers kick panel. I have tested every wire even remotely fitting this description and have come up with nothing. Is there a certain way to test it? i have been testing it by arming and disarming the system with the factory key fob. Any help with this would be greatly appreciated

Tim

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 04, 2006 at 5:24 PM / IP Logged

You need to turn the key in the drivers door cylinder to test.....

Mike M2

Tech Manager

CS Dealer Services

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Isuzu Rodeo Factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.