what do i do after the 6 coats of fb

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / what do i do after the 6 coats of fb (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: January 17, 2006 at 9:07 AM / IP Logged

I actually use bolts sometimes instead of velcro. Because an enclosure with the whole bottom lined with industrial strength velcro is almost impossible to remove.

TCalYen

Back to Top

pmendoza408

Copper - Posts: 56

Joined: December 23, 2005

Location: United States

Posted: January 18, 2006 at 12:01 AM / IP Logged

but would the velcro compromise the structure of the box?

Back to Top

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: January 18, 2006 at 12:29 AM / IP Logged

See the enclosure in my sig? It weighs close to 200lbs with the driver mounted. Totally held in place be IS velcro. The velcro is adhered to the bottom of the enclosure.

TCalYen

Back to Top

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: January 18, 2006 at 2:36 AM / IP Logged

Have you been in an accident with that in the car? I'm just erring on the side of safety. Velcro is good for some things, but not for keeping a box from becoming a 200 lb projectile in an accident. No amount of Velcro will hold that, even the industrial stuff.

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what do i do after the 6 coats of fb

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.