Sensors inputs?

Home / the12volt's Install Bay / Car Security and Convenience / Sensors inputs? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

borgreu

Member - Posts: 6

Joined: December 15, 2005

Posted: January 11, 2006 at 2:32 PM / IP Logged

just bought new alarm for installation. it is to be installed on an old car with no electric windows and no central lock. the difficulty is in wiring the sensors to the alarm brain! it does not have any modules or ports where to wire the trigger from the sensor!! however it does have these connections> door trigger(+) , door trigger (-), cut off port, acc input.

the sensors' triggers connect to any of these?

one other thing... if i buy an alarm brand X, can i wire sensors brand Y to it?

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 11, 2006 at 3:51 PM / IP Logged

yes most sensors regardless of brand send negative triggers.

use a neg door trigger for the sensors if you using the trigger for more than a couple of sensors use diodes

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

borgreu

Member - Posts: 6

Joined: December 15, 2005

Posted: January 11, 2006 at 4:03 PM / IP Logged

Sensors inputs? - Last Post -- posted image.

something like this?? so green and blur triggers i connect the sensors trigger??

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 11, 2006 at 4:05 PM / IP Logged

yes like that

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

borgreu

Member - Posts: 6

Joined: December 15, 2005

Posted: January 12, 2006 at 6:03 AM / IP Logged

the sensors always to the negative door trigger input?? or can they be to the positive??

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 12, 2006 at 9:26 AM / IP Logged

if its a positive signal from the sensor but they are usually neg.

you can change neg to pos with the help of a relay then use the pos oor trigger

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Sensors inputs?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.