door trigger for alarm, 2003 qc ram

Home / the12volt's Install Bay / Car Security and Convenience / door trigger for alarm, 2003 qc ram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kicker3

Member - Posts: 2

Joined: January 12, 2006

Location: United States

Posted: January 15, 2006 at 11:57 AM / IP Logged

the alarm i am installing has a door trigger - and a door trigger +. The info i have read from various posts mention connecting it to the brown - domelight wire in the A-piller. But i have two wires. I think i am making it harder than it should be. Any help would be much appreciated. Thanks.

Back to Top

Mharvey

Copper - Posts: 76

Joined: October 27, 2004

Location: United States

Posted: January 15, 2006 at 12:13 PM / IP Logged

i woul d guess that means it can use either - or + door trigger since you have a - trigger use it

Back to Top

kicker3

Member - Posts: 2

Joined: January 12, 2006

Location: United States

Posted: January 15, 2006 at 5:22 PM / IP Logged

Thanks for the info.

Back to Top

anickle

Member - Posts: 42

Joined: August 01, 2004

Location: Canada

Posted: January 15, 2006 at 11:04 PM / IP Logged

Before you do this you should check if the trucks bcm goes to sleep, if it does after you are finished it could cause the alarm to false! Roll window down lock the truck and then let it sit for about 10 mins, then stick you hand in the window and try unlocking with the door switch... if no unlock then it has gone to sleep and you will need to isolate with a relay or double dioding(FUN). On the other hand if your truck does not have the sleeping bcm... That is good:P

andrew nickle

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door trigger for alarm, 2003 qc ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.