the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avic n2 XM


Post ReplyPost New Topic
< Prev Topic Next Topic >
slopoke 
Member - Posts: 2
Member spacespace
Joined: January 17, 2006
Location: United States
Posted: January 17, 2006 at 11:40 PM / IP Logged  
hey there, well i jsut installed my n2 tonight and all the features work exept the xm part.  it seems to me that the xm box i have (gex-p10xmt) is not sending any info at all the the HU.  i say this because on the screen where you can choose radio, disc, xm, the only button i can push is the radio one.  the XM button is not lit up to even be an option.  I have checked the wiring 10 times and it all seems fine, does anyone have a suggestion for me, i have hit the reset button on it as well.  thanks for any help
hybridamp 
Member - Posts: 29
Member spacespace
Joined: January 18, 2006
Location: United States
Posted: January 18, 2006 at 12:25 AM / IP Logged  

You have the wiring harness on the tuner (yellow = constant +12v, black = ground) and the ip-bus connected to the properly colored ip-bus connectors, right?

slopoke 
Member - Posts: 2
Member spacespace
Joined: January 17, 2006
Location: United States
Posted: January 18, 2006 at 12:45 AM / IP Logged  
yea, radio works fine and navigation, just cannot get to the xm...
12v_rep 
Copper - Posts: 188
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 28, 2004
Location: United States
Posted: January 19, 2006 at 8:43 AM / IP Logged  
I concur with Hybrid. Triple check and make sure you have the yellow lead going to a constant 12volt source. Make sure you have the P-bus cable in the right port on the XM Receiver(there is an in and an out, you want out). Also, make sure you have to P-bus hooked up and NOT just the data cable. And if you are not going to activate the Navtraffic portion of the GEX-P10XMT, do not bother hooking up the data cable. You will get an "XM Updating" message all the time if you do.
full_flex 
Member - Posts: 14
Member spacespace
Joined: December 29, 2005
Posted: January 21, 2006 at 8:04 AM / IP Logged  

12V_REP wrote:
And if you are not going to activate the Navtraffic portion of the GEX-P10XMT, do not bother hooking up the data cable. You will get an "XM Updating" message all the time if you do.

Will NavTraffic still work properly if you disconnect the data cable?

whtcrxghst 
Copper - Posts: 210
Copper spacespace
Joined: August 05, 2005
Posted: January 21, 2006 at 12:47 PM / IP Logged  
No.  Thats why he says this "And if you are not going to activate the Navtraffic portion of the GEX-P10XMT"
full_flex 
Member - Posts: 14
Member spacespace
Joined: December 29, 2005
Posted: January 23, 2006 at 8:00 AM / IP Logged  
ok, just re-read, thanks.
full_flex 
Member - Posts: 14
Member spacespace
Joined: December 29, 2005
Posted: January 23, 2006 at 8:17 AM / IP Logged  
Is there any way to stop the XM updating message from coming up so often?  It would be nice to have XM update in the backgorund, even better if they came out with an update for the AVIC-N2 for this.
ohlarikd 
Copper - Posts: 56
Copper spacespace
Joined: January 04, 2006
Location: United States
Posted: January 23, 2006 at 10:57 AM / IP Logged  
I got the V1.2 DVD disc for my D1. I only get Updating once, after I hit OK to the NAV legal disclaimer. It never appears again. I heard DVD 1.0 would say Updating over and over.
My D1 update paperwork said it was actually for the N2, so I assume they both have the same software, and this upgrade should solve your problem. Email Pioneer customer service, and they should send it for free.
Derek
full_flex 
Member - Posts: 14
Member spacespace
Joined: December 29, 2005
Posted: January 23, 2006 at 11:47 AM / IP Logged  
Thanks Derek, I heard about the 1.2 version.  I was told that when I register my AVIC-N2 that Pioneer would send them out to me.  No word yet, so I think I'll call them up to see what's up.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, December 3, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer