the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avic n2 XM


Post ReplyPost New Topic
< Prev Topic Next Topic >
ohlarikd 
Copper - Posts: 56
Copper spacespace
Joined: January 04, 2006
Location: United States
Posted: January 23, 2006 at 12:34 PM / IP Logged  
Yeah, I waited a month at least at first. Then I decided to email them, and they shipped it out in two days. I think you have to give them a little kick start.
Derek
dstang24 
Copper - Posts: 98
Copper spacespace
Joined: September 06, 2005
Location: United States
Posted: January 23, 2006 at 4:50 PM / IP Logged  

I had the same problem with my N2 with the XM navtraffic unit.  The XM wasn't working... You have the serial port connected to the add on portion of the navtraffic unit... There are 2 serial ports on the unit.  One is to go to the N2 and the other is to add another accessory such as a cd changer... switch your connection on the XMnavtraffic piece and it will work. 

Dstang24

ohlarikd 
Copper - Posts: 56
Copper spacespace
Joined: January 04, 2006
Location: United States
Posted: January 29, 2006 at 3:48 PM / IP Logged  
I waited over a month. Then I emailed them and got a response in two days, then a DVD within 2 weeks. I guess its not a priority for them, but if you ask, you shall receive.
Derek
kawizx902 
Member - Posts: 12
Member spacespace
Joined: September 24, 2005
Location: Massachusetts, United States
Posted: March 11, 2006 at 8:09 PM / IP Logged  

I have a question I just installed the N2 in my Truck and I did not purchase the NavTraffic and Xm because I have an older XM(The one that comes with the two small boxes and is connected by RCA cables and the round plug)  I had it connected to my DEH-P9600 and it worked fin now it will not work at all.  I have power and I tried it on the 9600 again and it was fine but on the n2 it won't work.

please help

thanks

whtcrxghst 
Copper - Posts: 210
Copper spacespace
Joined: August 05, 2005
Posted: March 12, 2006 at 6:29 AM / IP Logged  

Two small boxes???  You mean the terk products?  They don't work with pioneer A/V stuff.  Buy the pioneer one and you should be fine

kawizx902 wrote:

I have a question I just installed the N2 in my Truck and I did not purchase the NavTraffic and Xm because I have an older XM(The one that comes with the two small boxes and is connected by RCA cables and the round plug)  I had it connected to my DEH-P9600 and it worked fin now it will not work at all.  I have power and I tried it on the 9600 again and it was fine but on the n2 it won't work.

please help

thanks

kawizx902 
Member - Posts: 12
Member spacespace
Joined: September 24, 2005
Location: Massachusetts, United States
Posted: March 12, 2006 at 8:12 AM / IP Logged  

Thanks i was told that it does and i have been going crzy trying to figure it out.

thanks

anthony

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, September 26, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer