working with about 1.5 ft^3 and 1100 rms!

Home / the12volt's Install Bay / Car Audio / working with about 1.5 ft^3 and 1100 rms! (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: January 22, 2006 at 11:23 AM / IP Logged

Sure, you don't want to have a screwy-looking crooked 12" in there. A quick glance at the IDQ10 looks like a good match for your project. A pair of the DVC 2 ohm will give you a total 2 ohm load on that amp for the right amount of power input.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 23, 2006 at 9:15 PM / IP Logged

Ok, ive been doing some more research and im lookin at the Elemental Designs 11kv.2. Its in the right power range, and likes small enclosures. i'm thinkin 2 or 3 of these will do it. I was listenin to some rap this weekend and realized that if i lose the volume i have now i'm gonna be unhappy.

blah blah blah blah

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 25, 2006 at 5:00 PM / IP Logged

Has anybody heard these subs before?, if so what can you compare them too?

blah blah blah blah

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

working with about 1.5 ft^3 and 1100 rms!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.