Code Alarms

Home / the12volt's Install Bay / Car Security and Convenience / Code Alarms (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

LqDFx

Copper - Posts: 69

Joined: July 10, 2004

Location: Indiana, United States

Posted: January 22, 2006 at 7:44 PM / IP Logged

I have bought the following for my car: CA-425A, CA-135, and CA-545.

I was told that I could use the CA-135 for the security features and use the CA-545 to upgrade to the remote start features. But I am confused as to if I plug in both the 4 pin and 6 pin connectors? They both have some of the same features and I am not sure if by using both connectors I will be overloading the unit?

Any help?

Sony XAV-A1 HU, RF P4004 AMP, RF P3001 AMP, 2 RF 10" P1S410 Subs, LA S2.35.2 Dash Speakers, LA S2.525.2 Door Speakers, RF FRC3268 Rear Speakers

Hornshockey

Silver - Posts: 520

Joined: January 31, 2005

Location: Texas, United States

Posted: January 22, 2006 at 7:47 PM / IP Logged

you're talking about the 4 pin and 6pin heavy gauge wires, correct?

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

LqDFx

Copper - Posts: 69

Joined: July 10, 2004

Location: Indiana, United States

Posted: January 22, 2006 at 8:44 PM / IP Logged

Yep, that would be the ones

Sony XAV-A1 HU, RF P4004 AMP, RF P3001 AMP, 2 RF 10" P1S410 Subs, LA S2.35.2 Dash Speakers, LA S2.525.2 Door Speakers, RF FRC3268 Rear Speakers

Hornshockey

Silver - Posts: 520

Joined: January 31, 2005

Location: Texas, United States

Posted: January 23, 2006 at 12:17 AM / IP Logged

you will need to use both harnesses for remote start, but I'm confused as to why you bought both the 135 and the 545. The 545 is remote start/keyless/security. It should include everything you need, the 135 will just give you some redundant harnesses.

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

LqDFx

Copper - Posts: 69

Joined: July 10, 2004

Location: Indiana, United States

Posted: January 23, 2006 at 6:41 AM / IP Logged

I was going to just go with the CA135 since I was going to be swaping the AOD for a T5. I have since decided to not go with the T5 and since I am sticking with the AOD I wanted remote start. I looked at the new package and there is no shock sensor and the door lock/unlock wires are missing on the CA545. I could be looking at the install instructions wrong though. I also the led is missing in the CA545 package and only has the toggle switch. I can use the wires that I need off the CA135 and not the 4 pin main harness if redundancy is the case.

Sony XAV-A1 HU, RF P4004 AMP, RF P3001 AMP, 2 RF 10" P1S410 Subs, LA S2.35.2 Dash Speakers, LA S2.525.2 Door Speakers, RF FRC3268 Rear Speakers

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: January 23, 2006 at 8:28 PM / IP Logged

1. The shock sensor is inside the 425A.

2. I believe the lock harness in packaged with the 425A.

3. I believe the LED is also packaged ith the 425A.

You have everything you need for alarm and remote start between the 425A and the 545. You have no use for anything that is in the 135, except if you want 4 remotes for this system.

Keith

baff2004

Member - Posts: 7

Joined: July 26, 2005

Location: United States

Posted: January 24, 2006 at 2:02 AM / IP Logged

I just put a code alarm 135 and 425 in my truck, but the kit it came with also had the 535 (for remote start) Seeing as my truck is a manual, I decided not to put that on, but if you have all three, all you need to install is the 425 and the 535. You can use the remote from the 135 is you wish, too but everything you need to do the install is in the 535 and 425.

LqDFx

Copper - Posts: 69

Joined: July 10, 2004

Location: Indiana, United States

Posted: January 24, 2006 at 1:50 PM / IP Logged

baff2004 wrote:

What came with your kit for the CA-135 and535?

I have the CA-135,545, and 425a. Here is what is in each box.

CA-545:

Remotes
6 Pin Main Harness
Siren
Antenna/Harness
4 Pin Remotestart Harness (White)
4 Pin AUX Harness (Green)
Toggle Switch and Hoodpin

CA-135

Remotes
4 Pin Main Harness
Siren
Antenna/Harness
LED/Valet Switch
4 Pin AUX Harness (Green)
3 Pin Door Lock Harness (White)

CA-425A

Control Modual
22 Pin Main Harness

If I am correct, I am missing the LED/Valet Switch and 3 Pin Door Lock Harness from the CA-545 and I can just install the CA-545 in the system with the missing parts from the CA-135.

Sony XAV-A1 HU, RF P4004 AMP, RF P3001 AMP, 2 RF 10" P1S410 Subs, LA S2.35.2 Dash Speakers, LA S2.525.2 Door Speakers, RF FRC3268 Rear Speakers

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: January 24, 2006 at 3:31 PM / IP Logged

Are you sure you have two 4 pin main harnesses? That sounds odd. I've put a few of these systems in and never ended up with two 4 pin mains. I believe you should have 1 (supplied with 425A). The hood pin, locks, LED valet, hoodpin are usually with the 425.

Keith

khosa

Member - Posts: 12

Joined: March 20, 2004

Location: Canada

Posted: January 24, 2006 at 5:57 PM / IP Logged

your packages were probably opened. I have a brand new sealed box of CA-135 and the only thing inside is an antenna. everything else is in CA-425.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.