2002 ford explorer remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2002 ford explorer remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

toyotaman78

Member - Posts: 10

Joined: September 10, 2004

Location: United States

Posted: January 28, 2006 at 4:19 PM / IP Logged

Hey guys i put a prestige aps996a remote start on a 2002 ford explorer and i bypassed the anittheft the old school way with an extra key and i tagged the gem module into the unlock wire and for some reason the remote start will only start with the alarm disarmed? Any ideas

Back to Top

mike swanson

Copper - Posts: 290

Joined: January 28, 2003

Location: United States

Posted: January 28, 2006 at 4:36 PM / IP Logged

The factory alarm?

Back to Top

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: January 28, 2006 at 5:35 PM / IP Logged

Are you tied into the:

Factory Alarm Disarm GREEN/ purple - driver dr harness or CSM

Steve G

Back to Top

toyotaman78

Member - Posts: 10

Joined: September 10, 2004

Location: United States

Posted: January 28, 2006 at 11:53 PM / IP Logged

yep i tied the unlock wire into the factory disarm wire

Back to Top

nattopdog

Member - Posts: 13

Joined: January 19, 2006

Posted: January 29, 2006 at 2:41 AM / IP Logged

will it even try to start or it just does nothing. does the lcd still show its trying to start?

Back to Top

iskidoo

Silver - Posts: 1,040

Joined: December 08, 2002

Location: Maine, United States

Posted: January 29, 2006 at 7:55 AM / IP Logged

toyotaman78 wrote:

yep i tied the unlock wire into the factory disarm wire

Is your unit set to unlock before start? That's the only way I can see the alarm disarming hooked up that way.

Doesn't that system have a factory disarm output wire? Use that rather than tying unlock into factory disarm.

Steve G

Back to Top

toyotaman78

Member - Posts: 10

Joined: September 10, 2004

Location: United States

Posted: January 29, 2006 at 11:52 PM / IP Logged

it doesn't even try to start when the unit is armed lcd shows it is trying to start chimes but never starts and never shows on lcd.

it does not unlock before start and it doesn't have a factory disarm output wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 ford explorer remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.