Aftermarket central locking to Toad alarm

Home / the12volt's Install Bay / Car Security and Convenience / Aftermarket central locking to Toad alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

davemonkey

Member - Posts: 12

Joined: January 27, 2006

Location: United Kingdom

Posted: February 01, 2006 at 7:05 AM / IP Logged

I've got an aftermarket central locking kit which uses actuator motors to fit to my 1989 mini.

Any ideas how i connect it up to my Toad alarm? The manual shows a number of diagrams but i'm not sure what wiring method to use.

Have done a search but has turned up nothing. I guess i could use a trial & error method but thought i would see if anyone has any ideas first.

The alarm has the following connections:

Grey/Red - Lock Com

RED / Yellow - Lock No

Grey / YELLOW - Lock Nc

Blue / YELLOW - Unlock Nc

RED / Black - Unlock No

Blue/Red - Unlock Com

The central locking kit has:

Red - 12v

Black - Earth

White - Alarm

Brown - Remote control

Blue

Green

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 01, 2006 at 9:39 AM / IP Logged

does it say teh CL in negative control or pos

you alarm has locking relays

Why oh Why didn't i take the blue pill

Darren Power

davemonkey

Member - Posts: 12

Joined: January 27, 2006

Location: United Kingdom

Posted: February 01, 2006 at 10:40 AM / IP Logged

No the central locking kit doesn't say whether it is positive or negative. It has a module that came with it, not sure whether i leave that out for the alarm locking and wire it straight to the motors. Any suggestions welcome!

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 01, 2006 at 12:50 PM / IP Logged

whats the module like that cones with the kit what wires are in it

Why oh Why didn't i take the blue pill

Darren Power

davemonkey

Member - Posts: 12

Joined: January 27, 2006

Location: United Kingdom

Posted: February 01, 2006 at 4:23 PM / IP Logged

I guess the module is like a brain that tells the locks what to do, with the wires from the motors going into it. The connections are as above. I haven't got the kit with me at present so that's all i can say until i have another look. I wasn't sure whether to use a couple of wires from the alarm and connect them to the module or whether to miss out the module and connect the wires from the motors striaght to the alarm.

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 01, 2006 at 5:32 PM / IP Logged

use the module test the blue and green wires for 3wire neg or pos system

depending if the locking is pos or neg connect your alarm common wires to pos or neg and the nc wires to the apporpriate lock and unlock wires on teh CL unit

most aftermarket are neg systems

Why oh Why didn't i take the blue pill

Darren Power

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Aftermarket central locking to Toad alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.