the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

parking light flash on 96 voyager


Post ReplyPost New Topic
< Prev Topic Next Topic >
corchris 
Member - Posts: 4
Member spacespace
Joined: January 17, 2006
Location: Canada
Posted: February 07, 2006 at 12:33 PM / IP Logged  

Hi

I have a Viper 310v alarm and have everything hooked up and working, except the parking light flash. On this site I have learned that I have a (-) parking light and have found the wire at the bottom harness.  My alarm can either use its on-board relay and give off (+) light flash with an inline 30Amp fuse.  By changing a jumper in the alarm it could give off a (-) 200mA output.  I assume I should use the negative setting but is this enough power or do I need to install additional relays?

Thanks for any help,

Corey

Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: February 07, 2006 at 2:00 PM / IP Logged  

set the jumper to (-) and connect the wire to the one in the car the color is

GREEN / WHITE or GREEN/ red at the light switch

Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
corchris 
Member - Posts: 4
Member spacespace
Joined: January 17, 2006
Location: Canada
Posted: February 09, 2006 at 10:36 PM / IP Logged  

Just to be sure,  I found the GREEN / WHITE wire in the harness that plugs into the bottom of the BCM right below where the relays are plugged into. Is this the right one?

Thanks for your advice!

infinkc 
Copper - Posts: 438
Copper spacespace
Joined: October 28, 2002
Location: United States
Posted: February 09, 2006 at 10:51 PM / IP Logged  
use a dmm and verify that the wire goes neg when you turn the lights on
There are 10 types of people in the world, ones that understand binary and ones that dont.
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: February 10, 2006 at 12:55 PM / IP Logged  
The wire you need will be at the light switch harness. Should be GREEN / WHITE or GREEN/ red. Negative.
Gus
Wherever I go, that is where I end up......

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 24, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer