the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5000 issue


Post ReplyPost New Topic
< Prev Topic Next Topic >
willdkartunes 
Copper - Posts: 250
Copper spacespace
Joined: February 01, 2006
Location: United States
Posted: February 24, 2006 at 3:30 AM / IP Logged  
I have a 1997 Chevy S10 4x4 extended cab with a Viper 5000 car alarm. When I have the window half-way down and the alarm activated, is it normal for me to just reach in and unlock the vehicle without the alarm going off? Even more concerning, after I unlock the door, I can then open it and get in and the alarm still doesn't sound. (maybe a warning chirp, if that) I'm not saying I would ever leave my vehicle out of sight with my window open, but something about this doesn't sound right. Is this normal or is the installation on it done wrong? Feel free to comment because I didn't install it, so my feelings won't be hurt!!!!Viper 5000 issue - Last Post -- posted image.
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: February 24, 2006 at 4:08 AM / IP Logged  
The installation was done wrong..Sometimes you have to be careful when you get a unit installed,cuz everyone isn't honest.I know it sucks,but that's just the way it is.Now,if you do not have an proximity sensor,there is nothing to pick up someone reaching in you vehicle.That is what a proximity sensor is for.It picks up someone disturbing the radar field around your vehicle.Secondly,it sounds to me like your door trigger isn't wired in at all,or incorrectly.Did you not check your system after you had your unit installed??If you paid to have it installed,you need to go back and have the installer fix your system..
"ole blake"
kaezoo 
Copper - Posts: 125
Copper spacespace
Joined: April 26, 2005
Location: United States
Posted: February 24, 2006 at 6:26 AM / IP Logged  
No, you shouldn't be able to open a door without the alarm going off.
If your dome light stays on for a little while after you close the door, then you should wait for it to go out before you do your testing. Sometimes the alarm is connected to the dome light wire and won't really arm that zone until the light goes out and it thinks the door is closed. If the dome light goes out, then you can still open the door without setting off the alarm, you definitely have a problem.
Does this happen with the passenger door as well as the driver's door?
willdkartunes 
Copper - Posts: 250
Copper spacespace
Joined: February 01, 2006
Location: United States
Posted: February 25, 2006 at 12:09 AM / IP Logged  
The dome light is off when I try this. It doesn't matter which door. I get the same results from the driver and passenger doors.
pss5075104 
Copper - Posts: 144
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: February 25, 2006 at 8:33 AM / IP Logged  
take it back to where you had it installed and tell them they need to hook the door triggers up.
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer