My First Project

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / My First Project (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

rangeroveruk

Member - Posts: 7

Joined: December 08, 2005

Location: United Kingdom

Posted: March 05, 2006 at 3:43 PM / IP Logged

Expired by some of the top Work i've seen on this site Decided to give glassing ago

Please let me know what you think its my first Project and i'm quite Pleased with the Result

Amp and CD changer Both mount in the middle

My First Project -- posted image.

torquehead

Copper - Posts: 144

Joined: January 15, 2006

Location: United States

Posted: March 05, 2006 at 4:01 PM / IP Logged

Wow, 7 views and no positive reinforcement. Good job on your first run. MOST people, by reading alot of these forums, dont make it to the beginning it seems. You say your quite pleased with your work is good enough recongition. IF it sounds good because you payed attention to the internal volume required for those type of speakers, that its that much better. Wish you had mounted that Amp during the photos. Only thing I would not have done is mount the CD changer in this fabrication. I have done this before, and it made my CDs skip when playing at high volumes because of the tremendous vibrations, thats all. Good Job.

rangeroveruk

Member - Posts: 7

Joined: December 08, 2005

Location: United Kingdom

Posted: March 05, 2006 at 4:17 PM / IP Logged

thanks for that

will be fitting in my car tomorrow so will get some photos then with the amp and CD changer in place

and i'll let you know on the CD changer Skip Situation its got a good shock protection on the changer and a good memory so we'll see what happens

grantd

Copper - Posts: 60

Joined: March 02, 2006

Location: United States

Posted: March 05, 2006 at 6:03 PM / IP Logged

Looks really good especially for your first go at it. The paint seemed to finish out quite nice. What did you use for that?

Not a big fan of sony's stuff but if it sounds good enough for you thats all that matters.

torquehead

Copper - Posts: 144

Joined: January 15, 2006

Location: United States

Posted: March 05, 2006 at 10:48 PM / IP Logged

Welcome to our world RangeroverUK! Are you a Ranger by military, or do you drive a Ranger? I was wondering what this enclosure set was going in.

HottAccord

Silver - Posts: 247

Joined: August 12, 2004

Location: United States

Posted: March 06, 2006 at 12:02 AM / IP Logged

Yea man thats really good for your 1st project. Im sure there will be many more!! My First Project -- posted image.

Im a fiberglass whore!!

rangeroveruk

Member - Posts: 7

Joined: December 08, 2005

Location: United Kingdom

Posted: March 06, 2006 at 2:54 PM / IP Logged

thanks for the comments

as promised photos of the System intalled in the boot of my car the paint i used was Hammerite don't know if you have it in the US ?

My First Project -- posted image.

this is installed in my Ford Mondeo UK equivelent to the Contour

My First Project -- posted image.

my Screen name is due to my Restoration Project i currently have underway a 3.1 Turbo Diesel Range Rover

Pics here http://www.mondeosport.com/gallery/album81

torquehead

Copper - Posts: 144

Joined: January 15, 2006

Location: United States

Posted: March 06, 2006 at 6:51 PM / IP Logged

There we go, great shot of the final install! So, how did the CD changer do? Any issues of skipping due to vibrations?

rangeroveruk

Member - Posts: 7

Joined: December 08, 2005

Location: United Kingdom

Posted: March 08, 2006 at 12:13 PM / IP Logged

no Issues with CD skipping had it up as high as i can get the volume and not a problem

My First Project -- posted image.

torquehead

Copper - Posts: 144

Joined: January 15, 2006

Location: United States

Posted: March 08, 2006 at 6:11 PM / IP Logged

Cool, so you have great form and function of the whole fabrications! Job Well Done! Enjoy...how rewarding eh?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.