Properly fused and wired?

Thought you might be interested in a dual fused distribution block made by Stinger model#SHDA2PG. It has provisions for 2 fused circuits (MIDI fuses) & also for 2 ground circuits. It has independent voltage or amperage LED readouts for each circuit via a switch. When you turn up the volume, there are rows of LED's that cycle with amperage changes; pretty cool. It nice to have the voltage readings for listening when parked & knowing when to recharge; also knowing how hard each amp is being driven. Did I mention it's cool looking!  If your interested, do a search on the net; I found it on eBay. It's such a new model, it wasn't listed on Stinger's web site. It also has both 1/0 & 4 ga inputs for both power & ground &  2, either 4 or 8 outputs for each circuit & ground. It would have the 1/0 inputs for the battery lines & also have a place to connect  the 2nd battery/cap in the 4ga inputs.

I only use the 4ga inputs, but plan on using the open 1/0 for a backup battery and/or extenal AC power supply via an isolator; for listening while on camping trips. If anyone knows of somone running this type setup or has installed one let me know the details.