Running 6 speakers on a Alpine CDA-7863 w/NO amp ?

Home / the12volt's Install Bay / Car Audio / Running 6 speakers on a Alpine CDA-7863 w/NO amp ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Sagrox2000

Member - Posts: 14

Joined: August 27, 2002

Location: United States

Posted: December 31, 2002 at 10:39 AM / IP Logged

Does anyone know how or if it is possible to bridge to front speakers to run a mid-rang and tweeter on both the left and right front channels from a CDA-7863 ? and if so........what ohm level would it be pulling, and would it fry the hu. I am trying to stay away from crossovers, and just use the internal crossover on the CDA-7863. The front speakers will be Boston Acoustic 6 1/2's w/seperate tweeters.

Any help would be much appreciated.

Thanks,

Dantax

"Alpine Is The Top Dog"

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 01, 2003 at 10:29 AM / IP Logged

It is possible, but the speakers will distort at about 15 or sooner on the volume control. The amplifier is not powerful enough to properly power the BA speakers.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Running 6 speakers on a Alpine CDA-7863 w/NO amp ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.