95 intrepid door locks

Home / the12volt's Install Bay / Car Security and Convenience / 95 intrepid door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Wess

Member - Posts: 7

Joined: December 20, 2002

Location: United States

Posted: December 31, 2002 at 11:24 AM / IP Logged

Hello,

I hooked up a Pro-Start 2300 (remote start and keyless entry) and had the door locks hooked up backwards. The doors would unlock when I hit the lock button and lock when I hit the unlock button.

I reversed the wires today by cutting and spicing the wire by the connector ging in to the unit. Now =most of the time the doors work properly and when I start the car using the remote start the doors would properly lock. I did notice twice in about 15 attemps that the doors did not lock when I remote start and the doors would not lock even after hitting the lock button on the remote.The last time this happened, I think that after locking the doors using the factory lock button on the door things started to work properly again. I'm sure that it will stop working properly again at times.

What is going on?

Thanks,

Wes

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: December 31, 2002 at 1:22 PM / IP Logged

Try this, check if you can increase the time the door locks outputs are on.I've had that problem before and inceasing the trigger time for the door locks should solve the problem.

Meitech916

Member - Posts: 9

Joined: November 23, 2002

Location: United States

Posted: December 31, 2002 at 8:26 PM / IP Logged

Did you add relays to increase ground to the door locks? Many alarms come factory with a very light negative out, strong enough to barley trigger a honda.

Mo-

Installer/MECP First Class

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 01, 2003 at 8:06 AM / IP Logged

The ProStart only has (-) trigger locking wires, so Wes would had to have used a set of relays. Make sure that the power and ground on those relays are from a reliable source.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 intrepid door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.