adding relay to single wire locks

Home / the12volt's Install Bay / Car Security and Convenience / adding relay to single wire locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tintman97

Copper - Posts: 113

Joined: October 20, 2005

Posted: March 14, 2006 at 12:14 PM / IP Logged

I have a 2006 mazda 6 one wire door locks lock has a 1k resistor and unlock is stright to ground.

How do i add a relay as the RS does not have enough ground for lock

I tryed

86- 12V

85- input from RS

30-ground with resistor

87- lock wire in car

did absolutly nothing

Please can someone help

Snapper

Back to Top

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: March 14, 2006 at 12:23 PM / IP Logged

are you getting the signal from the alarm? try taking the alarm wire off the relay and supplying the relay and see if it activates, also is the locking still working in the car without remote?

i am also a technician so if you have any engine trouble let me know, and i will do my best to help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

adding relay to single wire locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.