timer disable

Home / the12volt's Install Bay / Car Security and Convenience / timer disable (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

hockeydude

Member - Posts: 18

Joined: March 21, 2006

Posted: March 21, 2006 at 11:24 PM / IP Logged

could you have an additional relay that was activated by a keyless entry door unlock or door lock switch that shut the vehicle off?

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: March 21, 2006 at 11:49 PM / IP Logged

I don't see why not. Its all in how many relays you want to use, and how much time you want to put in to designing the system to work around your needs.

Kevin Pierson

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: March 21, 2006 at 11:50 PM / IP Logged

What kind of ignition are you working with (1, 2, or 3 ignition wires?). Is there an accessory wire (or two)? Is it just a simple one wire starter?

Kevin Pierson

hockeydude

Member - Posts: 18

Joined: March 21, 2006

Posted: March 21, 2006 at 11:59 PM / IP Logged

probably just one wire, i havent decided yet. I need to make up my wiring diagram to figure this out.

brcidd

Copper - Posts: 274

Joined: January 07, 2005

Location: Ohio, United States

Posted: March 22, 2006 at 7:01 AM / IP Logged

Why not just buy a system that doe what you want it to do- The ones I use offer 12, 24, 36, or 48 minute run time, with options of infinite run time (till gas runs out) programmable from the remote-it is from the crimestopper line

Brcidd - Engineer That Does Remote Starter Installs on the side.

hockeydude

Member - Posts: 18

Joined: March 21, 2006

Posted: March 22, 2006 at 10:27 AM / IP Logged

do all remote starts in the crimestopper line have infinite run time? If not which model are you using

hockeydude

Member - Posts: 18

Joined: March 21, 2006

Posted: March 22, 2006 at 10:32 AM / IP Logged

I just looked at crimestopper and they only advertise a 12-48 minute run time

hockeydude

Member - Posts: 18

Joined: March 21, 2006

Posted: March 22, 2006 at 11:29 AM / IP Logged

I think i have come up with a custom made remote start that will work. I am downloading software to draw a nice picture of it and then i will upload it to see if yall think it will work properly. I used https://www.the12volt.com/relays/relays.asp to figure this out.

hockeydude

Member - Posts: 18

Joined: March 21, 2006

Posted: March 22, 2006 at 2:09 PM / IP Logged

how does this look i think it should kill the starter when it gets a signal that the engine is turning over.

https://i1.tinypic.com/s1lzs1.jpg

hockeydude

Member - Posts: 18

Joined: March 21, 2006

Posted: March 22, 2006 at 2:55 PM / IP Logged

since the topic has kinda changed i posted a new topic

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

timer disable

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.