big enough enclosure?

Home / the12volt's Install Bay / Car Audio / big enough enclosure? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mattsthru

Member - Posts: 25

Joined: March 20, 2006

Location: United States

Posted: March 28, 2006 at 6:51 AM / IP Logged

I'm running two JL 12W6V2's in a sealed enclosure the total internal volume is 2.5 cubic feet 1.25 per chamber. Seems a little small for such big speakers. There about the same size as the ones 12w08's come with (power wedge). Is this setup ok? Will I damage my speakers if I push them to the max? I've seen the ones JL makes for just one w6 (red and gray) and it's huge! Any suggestions? Thanks for reading - mattsthru

On a Mission...

supradude

Silver - Posts: 915

Joined: September 21, 2004

Location: South Carolina, United States

Posted: March 28, 2006 at 7:07 AM / IP Logged

Look at the paperwork that came with them. It should give you the min. and max. sizes that work with the subs. I like to build mine towards the large side of the specs. I'm not familiar with that particular sub.

'85 Toy

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

big enough enclosure?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.