06 subaru sti pioneer avic d1

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 06 subaru sti pioneer avic d1 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

docdc75

Member - Posts: 3

Joined: June 06, 2003

Location: New York, United States

Posted: April 11, 2006 at 1:29 PM / IP Logged

i'm getting ready to install a pioneer avic d1 into a 2006 subaru sti does anybody know where i can get the vehicle speed sensor pulse from.

Back to Top

sir_misery

Member - Posts: 23

Joined: January 19, 2006

Location: United States

Posted: April 11, 2006 at 10:01 PM / IP Logged

vss wire is in pin 26 of the 35 pin plug at the ecm below the glove box

hope this helps good luck

yeh? i can do that?

see! told ya!

Back to Top

docdc75

Member - Posts: 3

Joined: June 06, 2003

Location: New York, United States

Posted: April 12, 2006 at 6:15 PM / IP Logged

thanks for the info. yeah it was pin 26 but there was two 35 pin connectors on the ecm but i did figure it out it's the green with yellow strip wire is for the vss pulse

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 subaru sti pioneer avic d1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.