rattaling

i have dynamated everything except the floor in my 93 diamante the trunk, lid, rear deck, back wall, and all four doors sounds so much cleaner and double layered the back of my ported box and it got rid of my port noise from my 2 12"'s and tightened every bolt down and did foam fill in cracks the dynamat couldnt do but i still have allot of rattaling from my tail lights and the trunk latch i even put a piece of exteme dynamat around that helped but didnt get rid of it any1 have any suggestions it would be greatly appreciated93 diamante

pioneer deh-p3800mp

crossfire 40 band eq

alphasonik pma4075 mid amp

clif designs cd10.1Lx sub amp

powerbass xtreme 6 1/2 comp

"   " 6x9 rear

alpine 2 12" type r

ported 40hz tune

My cousin has the same problem. I think their's not much you can do.Checkout my self installed system. Just click on my homepage.

Caulk.Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

caulk what i really appreciate any responses93 diamante

pioneer deh-p3800mp

crossfire 40 band eq

alphasonik pma4075 mid amp

clif designs cd10.1Lx sub amp

powerbass xtreme 6 1/2 comp

"   " 6x9 rear

alpine 2 12" type r

ported 40hz tune

thanx stevdart ive read allot of ur posts and u seemed to me as one of the most umm educated people around on this stuff i really appreciate all the info have u looked at my post on "to many eq's" whats u input on that93 diamante

pioneer deh-p3800mp

crossfire 40 band eq

alphasonik pma4075 mid amp

clif designs cd10.1Lx sub amp

powerbass xtreme 6 1/2 comp

"   " 6x9 rear

alpine 2 12" type r

ported 40hz tune

oh yea my box is 1.4 cu. ft. per sub tuned @ 40hz 93 diamante

pioneer deh-p3800mp

crossfire 40 band eq

alphasonik pma4075 mid amp

clif designs cd10.1Lx sub amp

powerbass xtreme 6 1/2 comp

"   " 6x9 rear

alpine 2 12" type r

ported 40hz tune