the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 dodge magnum, alarm/remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
Reeceddogg 
Copper - Posts: 329
Copper spacespace
Joined: September 23, 2002
Location: United States
Posted: May 25, 2006 at 1:09 PM / IP Logged  
after the key is removed like in the old hondas. also could i get some help on wiring the 556l for the door locks
enihcamxes4you 
Member - Posts: 24
Member spacespace
Joined: January 17, 2006
Location: Ohio, United States
Posted: May 27, 2006 at 2:29 AM / IP Logged  

if you start the car with the key can you take it out and it keeps running? if so you might have some feedback on an ignition wire keeping the car running.

Lenny Jenkins
MECP First Class Installer
6 years
Reeceddogg 
Copper - Posts: 329
Copper spacespace
Joined: September 23, 2002
Location: United States
Posted: May 27, 2006 at 2:43 AM / IP Logged  
I didn't use a diode that's why. works good now but what about the 556l for the door locks.
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: May 27, 2006 at 9:22 AM / IP Logged  
You mean the 456L, correct?
Once all connections are made you must learn the values of lock and unlock. This is explained in detail in the installation manual on page 2. It involves hooking the blue/white to ground, disconnecting it, tapping it to ground once, reconnecting it and pushing the lock button on the door. To program unlock you follow the same procedure but tap it to ground twice. Just follow it step by step and it should work fine. I have had great success using these modules in the past.
Reeceddogg 
Copper - Posts: 329
Copper spacespace
Joined: September 23, 2002
Location: United States
Posted: May 27, 2006 at 12:17 PM / IP Logged  
yes. it was getting late. i just wasn't sure what method to use.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer