2001 eclipse, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2001 eclipse, remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: May 01, 2006 at 9:45 AM / IP Logged

joe61177 wrote:

are you saying I should hook up the heavy gauge violet wire from the 561r r/s which is the starter output and connect it to the wire that goes to the starter (engine side) . I believe that wire was cut and goes to a relay . do I just tie it in there

Yeah the heavy purple wire from the r/s will go to the starter side of you're starter kill relay.

Cause I'm So white and nerdy...

First Class Certi-fried installer

maluherby

Member - Posts: 2

Joined: May 01, 2006

Location: Philippines

Posted: May 01, 2006 at 11:18 AM / IP Logged

hi! i have a mannix SM700 and i dont a have a manual. Can anyone send me a manual or give me a link. because my remote start did not work.

maluherby

Member - Posts: 2

Joined: May 01, 2006

Location: Philippines

Posted: May 01, 2006 at 11:50 AM / IP Logged

Can any one have a manual of mannix SM700? because i lost my manual and i my remote start doesn't work. please send me a copy or post here.

my email : maluherby@yahoo.com

maluherby

joe61177

Member - Posts: 34

Joined: December 04, 2005

Location: United States

Posted: May 01, 2006 at 3:48 PM / IP Logged

maluherby wrote:

Can any one have a manual of mannix SM700? because i lost my manual and i my remote start doesn't work. please send me a copy or post here.

my email : maluherby@yahoo.com

couldnt start your own discussion huh

anyway i was working on the alarm all day done tons of alarms and tons of r/s but never did had to add one to the other and god does adding the violet wire after the starter kill make so much sense now. I feel so damn goofy thanks guys for all your help

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: May 01, 2006 at 4:37 PM / IP Logged

Not a problem. Nice to hear it all worked out for ya. If you wanted to get really tricky you can wire it up so that the starter kill will act as antigrind as well. Let me know if you want to other wise, have fun and happy installing.

Cause I'm So white and nerdy...

First Class Certi-fried installer

bmwpwner

Copper - Posts: 174

Joined: January 28, 2006

Location: United States

Posted: May 01, 2006 at 11:44 PM / IP Logged

it is so much easier to just pull the alarm out and use an all in one alarm/remote start/keyless entry system. i know this isn't what you want to hear but it is the truth. good luck and hope this helps.

"I cannot teach anybody anything, I can only make them think."

-Socrates-

joe61177

Member - Posts: 34

Joined: December 04, 2005

Location: United States

Posted: May 02, 2006 at 7:24 AM / IP Logged

IT would be and believe me I love to that just the car owner doesnt want to do that but i got it working so it doesnt matter thanks for all the help

joe61177

Member - Posts: 34

Joined: December 04, 2005

Location: United States

Posted: May 02, 2006 at 7:25 AM / IP Logged

well the cars gone and out of my hair but for future referance please do always can use the knowledge

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: May 02, 2006 at 8:08 AM / IP Logged

Really not a lot to it. Just take the pink 3rd igniton output and tie it into the gwa wire on the starter kill. just make sure you diode isolate it so you don't end up with the igniton turning on whenever the alarm is alarmed.

Cause I'm So white and nerdy...

First Class Certi-fried installer

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 eclipse, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.