the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 Pontiac Grand Prix remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
Sham 
Member - Posts: 2
Member spacespace
Joined: October 10, 2004
Posted: May 01, 2006 at 8:44 PM / IP Logged  

I put on a Auto-page rs-620 everything works but when I remote start it the gauges are not working right it says low fuel and the traction control light comes on. I have a GM-SL bypass module and when you put the key in and turn it the gauges still dont act right you have turn the car off then restart it. The wiring sheet said that there  was 2 pink wires I tried both and only 1 works. Is it the module?

another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: May 01, 2006 at 10:50 PM / IP Logged  
PONTIAC, GRAND PRIX, 2005, Ignition

The BCM (Body Control Module) is below the driver side dash to the left of the steering column.

There are two pink wires in the BCM plug that meter as ignition. To verify that the correct wire is being energized for remote start, slide the key in the ignition key cylinder and then activate remote start. If the key in ignition warning chime comes on, then the correct wire is being energized.

also:

Accessory brown  +  ign harn or BCM, conn. C1, pin 23   05 Pontiac Grand Prix remote start -- posted image.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 02, 2006 at 10:49 AM / IP Logged  
What company is the GM-SL manufactured from ? The GM-SL modules that I've seen are not Passlock bypasses, just databus modules for door locks, RAP, door triggers, tach , etc....
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Sham 
Member - Posts: 2
Member spacespace
Joined: October 10, 2004
Posted: May 02, 2006 at 3:04 PM / IP Logged  
Jeff the bypass module is from Fortin Electronics Systems they teamed up with autopage.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 5, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer