Remote Start in 98 Toyota 4runner

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start in 98 Toyota 4runner (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

djambush

Member - Posts: 39

Joined: October 07, 2002

Location: United States

Posted: January 06, 2003 at 9:56 AM / IP Logged

I am about to install a RS unit in a 98 Toyota 4runner. This truck does not have factory keyless entry. It is of course automatic. I am having a little trouble locating the correct TACH wire location, DOME light location and doorlock/unlock. On the RS system there is lock/unlock then there is a wire for the triggers, what are they for? To connect to the same lock and unlock? Also, where do you run the power to for the power lock and unlock? (fuse box, back to the ignition where 12v constant is?). I am so lost.

Last but not least, I do not wish to have the siren connect BUT I don't want the HORN to give me a confirmation honk when I ARM the vehicle. I want it is very similar to factory alarms that come with them. Only honk when armed.

If there are any tips and tricks, please let me know!

I have my steering wheel column apart and i have not drove it in 2 days.

Thanks.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 06, 2003 at 12:13 PM / IP Logged

| 12V|white - WHITE/ red |+ |ignition harness |

Notes:

NOTE: Some models have an immobilizer system that needs to be bypassed during remote start. Use DEI module 555F or 555U to bypass. *1 Ignitor is on passenger side fender well. Diagnostic connector is on drivers side top of motor. *2 The ECM is behind the glove box.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start in 98 Toyota 4runner

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.