the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

15 MPH Door lock


Post ReplyPost New Topic
< Prev Topic Next Topic >
Arnie2002 
Member - Posts: 3
Member spacespace
Joined: May 08, 2002
Posted: May 14, 2002 at 5:05 PM / IP Logged  

I have a 1998 dodge stratus that automatically locks tha door at 15 MPH.  After installing a keyless entry Python 400ESP and enabling the lock door upon starting the car the 15 MPH feature don't work anymore.  Even after taking the keyless entry out the auto door lock at 15 MPH does not work anymore.  Is there a relay or fuse for this 15 MPH door lock feature on 1998 Dodge stratus'?  Thanks.

Big Dog 
Gold - Posts: 1,265
Gold spaceThis member consistently provides reliable informationspace
Joined: May 02, 2002
Location: Quebec, Canada
Posted: May 15, 2002 at 12:42 PM / IP Logged  

Hey Arnie,

There are at least three fuses to the door lock circuit but I suggest check all fuses in the car and under the hood even the ones that have nothing to do with the door locks necessarily.  Unless I'm mistaken I think the DRL also work with a signal from the VSS.  Do your Daytime running lights work?

When you re-install your alarm be sure to change the programming to remove the IGNITION LOCK feature.  No doubt there was a conflict which caused this domino effect. 

Prepare your future. It wasn't the lack of stones that killed the stone age.
Arnie2002 
Member - Posts: 3
Member spacespace
Joined: May 08, 2002
Posted: May 21, 2002 at 5:13 PM / IP Logged  
No luck.  Checked all the fuses and they're all fine.  I do not have any DRL on this 98 stratus.  I have it set right now to lock the door after 3 sec. of ignition.  I turned off this feature even took the keyless entry system off but the car won't lock at 15 MPH anymore.  All the power door locks still works.  Any more ideas where to check for this?  Any relays to check out?  Thanks for all the help.
Q2Installs 
Member - Posts: 16
Member spacespace
Joined: May 18, 2002
Location: United States
Posted: May 21, 2002 at 9:07 PM / IP Logged  
I would like to know how you disabled it...I have customers ask all the time to get rid of it (why I don't undersatand...safe is good)......

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer