94 Altima

Home / the12volt's Install Bay / Car Security and Convenience / 94 Altima (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pbmax

Member - Posts: 2

Joined: January 06, 2003

Location: United States

Posted: January 06, 2003 at 5:28 PM / IP Logged

Hello,

My friend has a 1994 Nissan Altima and we were planning to install his alarm that he bought for himself. He's kind of excited because I did it so easy on my 99 Civic. The bad thing is that Honda's are popular and I got a lot of documentation and help doing it.

He is hoping that it'll be easier (Since he already has power locks and it's an automatic car) Could I use the diagram for the Maxima or Sentra you have posted? His car came with no books. Also, I don't know what models are the same as his year. The internet is bare bones for his car model. Could you help me?

He got an alarm with remote start. He already has power locks. I guess what I really need is a diagram of what color the wires are and where I could find them.

Song :o)

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 06, 2003 at 11:58 PM / IP Logged

| 12V|wht/red to white |+ |ignition harness |

| TRUNK/HATCH PIN|red |- |at right hinge, *4 |

Notes:

*1 When doing remote start, this wire must be isolated from the keyswitch with the accessory relay. See direct fax document #1077. *2 Timer is a blk or grn box located right of fusebox behind a silver module or up high in the drivers kick behind a silver module, depending on model. Two plugs, white and black. The wires needed to control locks are in the black plug. *3 these colors are for low beam. to catch high beam use RED / black(+) and RED / green(+). *4 also found at the theft warning system in the drivers kick behind the ABS control unit if equipped with factory security.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

pbmax

Member - Posts: 2

Joined: January 06, 2003

Location: United States

Posted: January 07, 2003 at 9:44 AM / IP Logged

!! Oh, Dude!!

Thank You so-o-o-o-o much! We will install it this weekend. You Rock!

Song :o)

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 07, 2003 at 9:57 AM / IP Logged

Ssweeeeeeeeeeett !!!!

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 Altima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.