Basic electroincs

Home / the12volt's Install Bay / Car Security and Convenience / Basic electroincs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

supadupagt4

Member - Posts: 3

Joined: May 13, 2006

Location: United Kingdom

Posted: May 13, 2006 at 2:19 PM / IP Logged

HI all,

new here and to electronics so go easy on me. Basic electroincs -- posted image.

I see from reading through this greatly informative site that i have to use a mutlimeter to check for (-) and (+).. how do i check for them using a multimeter? does anyone have a wiring diagram for a toyota celica GT4(alltrac) 1993?

I am hoping to fit a toad AI606 to my car in a few days, can anyone tell me what things i'll need apart from copious tins of beer, breaks, wire cutters/soldering iron/multimeter/shrinktube/???

thanks for help,

tony.

Back to Top

jonchos

Copper - Posts: 256

Joined: February 28, 2005

Location: United States

Posted: May 13, 2006 at 2:36 PM / IP Logged

Not to disencourage you, but if you do not know how to use a DMM is probably best for you to get the Alarm installed at a shop. If you decide to do it yourself, search on how to use a DMM on the web.

Back to Top

supadupagt4

Member - Posts: 3

Joined: May 13, 2006

Location: United Kingdom

Posted: May 13, 2006 at 2:45 PM / IP Logged

Thanks for your most interesting and thoughtfull help.

NOT!.

tony.

Back to Top

jonchos

Copper - Posts: 256

Joined: February 28, 2005

Location: United States

Posted: May 13, 2006 at 3:07 PM / IP Logged

I am just thinking about your safety and the safety of your car.

Back to Top

dxdenis02

Copper - Posts: 72

Joined: February 27, 2006

Posted: May 15, 2006 at 12:15 PM / IP Logged

on the dmm there is a blk and red lead... once you set the voltage to dc... ground your black lead to a known good ground... use the red to probe wires when voltage is present the dmm will read the voltage. i would get the write-up for the car and use this as a guide ... remeber to always verify your connections with the dm for proper installation

Back to Top

dxdenis02

Copper - Posts: 72

Joined: February 27, 2006

Posted: May 15, 2006 at 12:17 PM / IP Logged

to test for the tach use the same exact procedure as above except set the dmm the ac

enjoy

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Basic electroincs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.