Double Din in a 2005 300c

Home / the12volt's Install Bay / Car Audio / Double Din in a 2005 300c (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Uniqueauto

Copper - Posts: 73

Joined: January 04, 2005

Location: United States

Posted: May 16, 2006 at 1:27 AM / IP Logged

Will a double din fit in a 2005 Chrysler 300c?

Installer/Owner

Double check twice Install once!

Wires are my Best Friends

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: May 16, 2006 at 10:47 AM / IP Logged

with some very minor trimming on the bezel it will work fine. The one I did fit with no trimming but would catch the bezel when the face was flipped down. With a knife I just used the edge and wore down the bezel a little bit and it worked perfect.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Double Din in a 2005 300c

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.